CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
FINAL INSTALLATION OF CLAMP PLATE ASSEMBLIES
Clamp plate assemblies (5) are installed on either side of the mounting plate assembly (2) and work in
conjunction with the tie down post assemblies to secure the CBC/mounting plate combination to the
When the CBC is in its final position, install two 1/2-13 UNC x 4.5 inch hex head bolts (3) through the
holes in the clamp plate channel (1).
Install a spacer block (4) and clamp plate assembly (5) onto the bolts (3) and secure with 1/2 inch flat
washer (6) and 1/2-13 UNC hex locknut (7). Be sure that the side of the clamp plate assembly (5) with the
rubber pad (8) engages securely on the underside of the truck bed (9).
Repeat for the second clamp plate assembly located on the opposite side of the CBC.
Tighten all clamp plate assembly hardware securely.
Once the CBC has been properly secured to the vehicle, the Cargo Bed Cover is ready to be used as
detailed in WP 0005 entitled "OPERATION UNDER USUAL CONDITIONS".
END OF WORK PACKAGE
0014 00-21/(22 Blank)