CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
APPLYING RTV SILICONE SEALANT
Sealant should be applied only if the CBC is to be immediately mounted
to the vehicle bed. The sealant has a working time of approximately 20
minutes and will start to cure after that time. Installing the CBC on the
vehicle after the sealant begins to cure may adversely affect the
sealant's ability to properly bond with the vehicle bed.
Once all gaps have been identified and eliminated as described previously, a bead of RTV (silicone)
sealant must be applied where the weather stripping contacts the vehicle bed and around the threshold
To apply the RTV sealant, raise the CBC to a comfortable working height using the hoisting sling.
Install the supplied cartridge of sealant into a standard caulking gun. Trim the tip of the cartridge so that a
bead approximately 3/16 to 1/4 inch in width can be applied.
Apply a continuous bead of sealant (1) 3/16 to 1/4 inch in width on the surface of the weather stripping (2)
along the outer edge. Start at one point at the underside of the CBC and move around the entire
perimeter of the CBC applying sealant to all weather stripping surfaces.
Once sealant has properly applied to all weather stripping surfaces, the CBC should be lowered into
position on the vehicle bed.