CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
APPLYING RTV SEALANT TO THRESHOLD AREA
Once the CBC has been lowered into position and secured to the vehicle bed, RTV sealant must be
applied around the threshold area (1) at the rear of the CBC.
To apply sealant around the threshold area, start at the left corner (2) of the CBC and inject sealant (3)
under the area where the threshold (1) meets the vehicle bed (4). Fill the area sufficiently to create a
good weather seal.
Continue to apply a bead of sealant all along the edge of the threshold (1) at the point where it meets the
vehicle bed (4). Be sure to apply sealant around the hinge pivot pin area (5). Continue around the right
corner (6) of the CBC and inject sealant under the right side of the threshold (7) as was done with the left
Install Ladder. Install the ladder onto the inside surface of the M923, 5 T Cargo Truck tailgate as detailed
in WP 0016 entitled "Ladder Installation".
END OF WORK PACKAGE