CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
Insert the hex wrench (2) into the socket (8) at the top of the installation tool (1). Insert the jaws of the
adjustable or fixed wrench (3) on the flat-sided center section (9) of the installation tool (1).
While holding the hex wrench (2) stationary and the installation tool (1) at a right angle to the vehicle bed
(7), turn the wrench (3) in a clockwise direction keeping track of the number of turns.
Turn the nut (3) in a clockwise direction until firm resistance indicates that the fastener is completely set.
This will be approxmately 1-1/2 to 2 turns.
Once the Rivnut is completely set, turn the wrench (3) in a counter-clockwise direction to break its grip
with the Rivnut. Remove both wrenches (2,3) from the installation tool (1).
Remove the Rivnut installation tool (1) from the Rivnut by turning the entire tool by hand in a counter-
Install all remaining Rivnuts in a similar manner.