CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
INSTALLATION OF MOUNTING KIT FOR M923, 5 TON CARGO TRUCK
THIS SECTION COVERS:
Vehicle bed clean and free of debris
CBC unpacked as detailed in WP 0010 and
positioned on pallet near the vehicle.
Mounting Kit unpacked and hardware organized
Light machine oil
Tools and Special Tools
General Mechanic Tool Kit (WP 0041, Table 2, Item 1)
Sealant, Type II [RTV] (WP0055, Table
1, Item 18)
Before the Cargo Bed Cover can be installed on the bed of the M923, 5 T Cargo Truck, the bed surface
should be cleared of any foreign matter or other debris that would interfere with the installation process. A
mounting kit must be installed to the truck bed that will allow the CBC to be secured to the vehicle.
Unless it is already in an extended position, once the CBC has been separated from its shipping pallet
and prepared for installation as outlined in the UNPACKING section of WP 0010, it must be extended to
its operational position as outlined in WP 0005 entitled EXTENDING THE CARGO BED COVER TO AN
LIFTING THE CBC INTO POSITION ONTO THE VEHICLE BED AND
DETERMINING CORRECT MOUNTING LOCATION
Do not lift the Cargo Bed Cover in its height retracted (lowered)
condition. The CBC must be in its height extended (fully raised) condition
prior to using the lift rings for lifting.
When the CBC is in its fully extended position, it must be lifted into
position using the four Lift Rings positioned along the fore and aft roof
lines of the CBC. The CBC should be lifted into position over the vehicle
bed in accordance with the section of WP 0005 entitled HOISTING THE
CARGO BED COVER USING THE LIFT RINGS.