CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
OPERATION UNDER USUAL CONDITIONS
PREPARATION FOR MOVEMENT
When preparing to move from one field location to another for continued operation, the Cargo Bed Cover
can be left installed on the vehicle. It may be left in either the extended or retracted position.
If the CBC is in the extended position prior to movement, any cables entering the power and signal line
ports on the sidewalls of the CBC should be removed and the ports covered as detailed earlier in this
The personnel door should be closed and locked securely.
The ladder should be stowed and secured in place at the rear of the vehicle.
PREPARATION FOR STORAGE
The Cargo Bed Cover may be stored on or off of the vehicle. Prior to going into storage, all "After
Operation" PMCS procedures as outlined in WP 0012 should be completed. Reasonable steps should be
taken to provide a dry place protected from environmental extremes such as dust and rain for storage.
If the CBC will be stored off vehicle, it should be left in its fully extended position with the door closed and
If any CBC assemblies are in need of repair, the appropriate requests should be forwarded to Unit or
Direct Support maintenance as required.
All lubrication should be performed as detailed in WP 0007 entitled Lubrication Requirements prior to
0005 00-33/(34 Blank)